RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
21. Install the accessory drive belt tensioner. Tighten bolt to 43 Nm (32 ft. lbs.).
22. Install the accessory drive belt See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair/Serpentine Accessory Drive
Belt - Installation.
23. Install the upper cooling fan/drive/shroud assembly See: Cooling System/Radiator Cooling Fan/Service and Repair/Electric Radiator Fan -
Installation.
24. Connect the coolant recovery bottle hose to the radiator filler neck.
25. Install the radiator upper hose and clamps.
26. Check engine oil level.
27. Fill the cooling systemSee: Cooling System/Service and Repair.
28. Connect the negative battery cables.
29. Start engine and inspect for leaks.
