RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
CAUTION: Do not pre-fill the fuel filter with fuel. Severe damage to fuel system and injection system components may result.
NOTE: The engine has a self-priming low-pressure fuel system See: Powertrain Management/Fuel Delivery and Air Induction/Service and
Repair/Fuel System Priming.
NOTE: DO NOT USEbrake cleaner, carburetor cleaner, or similar harsh solvents for cleaning the internal housing walls.
1. Ensure that the internal housing wall is clean of debris before installing a new fuel filter cartridge.
2. Install fuel filter element (1).
3. Lubricate with clean engine oil and install the new O-ring (2).
4. Install the fuel filter housing cover (1) and tighten to 31 Nm (23 ft. lbs.).
Fuel Pump Module - Removal
REMOVAL
