RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
12. When equipped, install skid plates.
13. Tighten the DOC/DPF to turbocharger clamp to 17 Nm (13 ft. lbs.). Using a rubber mallet, hit the DOC/DPF to turbocharger clamp three times
around the perimeter of the clamp and tighten the clamp to 17 Nm (13 ft. lbs).
14. Connect electrical connectors.
15. Reconnect negative battery cables.
16. Using a scan tool, perform RESET REGENERATIVE FILTER TIMERS function found under ENGINE MISC. FUNCTIONS.
