RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
Blower Motor: Service and Repair
Blower Motor - Removal
REMOVAL
NOTE: The blower motor is located on the passenger side of the vehicle under the instrument panel. The blower motor can be removed from
the vehicle without having to remove the HVAC housing assembly.
1. Disconnect and isolate the negative battery cable.
2. Disconnect the HVAC wire harness lead (3) from the blower motor (2).
3. Remove the three screws (1) that secure the blower motor to the bottom of the HVAC housing (4) and remove the blower motor.
