RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
NOTE: If the seal on the air inlet is deformed or damaged, the seal must be replaced.
4. Carefully disengage the four retaining tabs (1 and 2) that secure the air inlet (3) to the top of the air inlet housing (4) and remove the air inlet.
5. To remove the recirculation-air door (2) from the air inlet housing (3), first carefully release the actuator coupler retaining tab (1) located on the
inside of the air inlet housing.
6. With the actuator coupler retaining tabs released, pull the actuator coupler (1) out of the recirculation-air door (2).
