RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
Horn Switch: Service and Repair
Horn Switch - Removal
REMOVAL
WARNING:
On vehicles equipped with an airbag, refer to restraint systems for warnings and cautions before servicing the horn switch.
1. Disconnect and isolate the battery negative cable.
2. Remove the steering wheel assembly (2), See: Steering and Suspension/Steering/Steering Wheel/Service and Repair/Removal.
3. Remove the two fasteners (2) and remove the steering wheel back cover (3).
4. Squeeze the tabs on each horn switch and remove the switches from the steering wheel armature.
5. Disconnect the electrical connector and remove the switch assemblies.