RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
Tire Pressure Warning Reset Switch: Service and Repair
Tire Pressure Monitoring Switch - Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the instrument panel center bezel, See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Instrument Panel Bezel - Removal.
3. Disconnect the switch/module electrical connectors.
4. Using an appropriate flat bladed tool, remove the light load switch/module from the bezel.
