RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
Intake Air Temperature Sensor: Service and Repair
Intake Manifold Air Temperature/MAP Sensor - Removal (Pickup)
PICK UP MODELS
The combination, dual function Intake Manifold Air Temperature Sensor/MAP (IAT/MAP) (3) sensor is installed into the intake air connection
manifold, below, and to the rear of the EGR valve (5).
1. Clean area around sensor.
2. Disconnect electrical connector (2) from IAT/MAP sensor.
3. Remove mounting screw (4).
4. Remove sensor from manifold.
5. Check condition of sensor O-ring.
