RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
Intake Air Temperature Sensor: Service and Repair
Intake Air Temperature Sensor - Removal
REMOVAL
The Inlet Air Temperature/Pressure Sensor (2) is located on the air cleaner cover.
1. Disconnect electrical connector (6) at sensor.
2. Remove mounting screw (1).
3. Remove sensor from air cleaner cover.
4. Check condition of sensor O-ring.
Intake Air Temperature Sensor - Installation
INSTALLATION
1. Check condition of sensor O-ring.
2. Position sensor (2) into top of air cleaner cover with a slight twisting action.
3. Install mounting screw (1).
4. Install electrical connector (6).
Intake Manifold Air Temperature/MAP Sensor - Removal (Pickup)
PICK UP MODELS