dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Recall - ECM Update For EGR Diagnostic|Page 2528 > < Recall - ECM Update For EGR Diagnostic|Page 2526
Page 4
background image

6. Enter your "User id" and "Password", then select "OK".

7. Select the "Next" tab bottom of the screen.

8. From the "Vehicle View" screen,  click on the PCM icon.

9. From the "PCM View" screen, compare the "Current ECU Flash Number" with the "New Part Number" listed on the "sort table". If the "Current

ECU Flash Number" is the same as the "New Part Number" continue to Step 18. If the part numbers are not the same, continue to Step 10.

10. With the cursor over the desired flash file, click the small green arrow button on the right side of the screen.

11. From the "ECU Flash" screen follow the wiTECH screen instructions to complete the flash.

12. Once the flash is complete click the "OK" button on the "ECU Flash" screen.

13. Turn the ignition to the "OFF" position for 2 minutes.

14. Select "Vehicle View" from the "PCM View" screen.

15. From the "All DTC's" tab, select the "Clear Stored DTC's" button.

16. Select "OK" from the pop-up text box.

17. PCM View" screen, compare the "Current ECU Flash Number" with the "New Part Number" listed on the "sort table". If the "Current ECU Flash

Number" is the same as the "New Part Number" the flash is complete. If the part numbers are not the same, repeat Steps 8 through 17.

18. Turn the ignition to the "OFF" position, remove the wiPOD and battery charger from the vehicle.

19. Continue with Section C. Install Authorized Modifications Label.

C. Install the Authorized Modifications Label

1. Type or print (with a ballpoint pen) the recall number, repair modification, dealer code and date on the Authorized Modifications Label (Figure 1).

2. Attach the label near the VECI label and then close the hood.

3. Complete Proof of Correction Form for California Residents.

Note:

This recall is subject to the State of California Registration Renewal/Emissions Recall Enforcement Program. Complete a Vehicle Emission
Recall Proof of Correction Form (Form No. 81-016-1053) and supply it to vehicle owners residing in the state of California for proof that this
recall has been performed when they renew the vehicle registration.

Recall - ECM Update For EGR Diagnostic|Page 2528 > < Recall - ECM Update For EGR Diagnostic|Page 2526