RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
10. Tighten the EGR cooler mounting bracket to cylinder head bolts to 36 Nm (27 ft. lbs.).
NOTE: Lubricate the new O-rings with a soapy water solution.
11. Using a new O-ring (2), install the forward coolant tube (3) onto EGR cooler (1).
12. Tighten nuts (4) on the exhaust transfer manifold (3) to 43 Nm (18 ft. lbs.).
13. Tighten clamp (2) to 10 Nm (89 in. lbs.).
