RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
EGR Valve: Procedures
CLEANING
6.7L EGR VALVE CLEANING PROCEDURE
1. Remove EGR valve assembly from engine. Refer to 6.7L EGR Valve removal See: Removal and Replacement/Exhaust Gas Recirculation (EGR)
Valve - Removal.
2. Remove four mounting screws (4) from EGR valve motor (3).
3. Remove valve motor (6) and shim (5) from EGR valve housing (1). Motor (6) and shim (5) must be kept for reassembly. The original EGR
valve motor and its shim must be reinstalled onto the original EGR valve housing.