RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
6. Remove the four EGR valve assembly mounting bolts (1).
7. Remove EGR valve assembly (2) from intake connector (3) by prying up.
8. Remove crossover tube doughnut gasket (1) and clean EGR valve. Also clean end of EGR tube of any old gasket material.
9. Remove two gaskets on bottom EGR valve (4). Clean bottom of EGR valve and top of its intake connection point of any old gasket material.
Pick Up Models
PICK UP MODELS
