RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
Fuel/Water Separator: Service and Repair
Fuel Drain Valve - Removal
Fuel Drain Valve Replacement
1. With engine not running, Route the fuel drain hose to an appropriate container and rotate drain valve (4) one quarter turn counter clockwise to
open it. Turn the key to the "ON" position. This will cycle the fuel pump for 2 seconds and drain the fluid from the fuel filter housing. Turn the
key to the "OFF" position and rotate the drain valve (4) clockwise one quarter turn to close it.
2. Disconnect drain hose (6) from the fuel drain valve.
3. Remove four drain valve mounting screws (5) and the drain valve (4) from filter housing (1).