RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
10. Connect the fuel pressure sensor (2) harness connector.
11. Connect both fuel injector harness connectors.
12. Connect the crankcase pressure sensor connector (2).
13. Install the CCV oil drains hoses (3) to cylinder head cover.
14. Install the EGR crossover tube cover (2). Tighten bolts (1) to 10 Nm (89 in. lbs).
15. Install the oil dipstick tube.
16. Connect both negative battery cables.
17. Start engine and check for leaks.