RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
Ignition Switch: Service and Repair
Wireless Ignition Node Receiver - Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the steering column cover opening See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Steering Column Opening Cover - Removal.
3. Remove the four Wireless Ignition Node (WIN) retainers (1).
4. Disconnect the WIN electrical connector.
5. If equipped, remove the WIN antenna connector.
6. Remove the WIN from the instrument panel opening.