RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
Parking Assist Control Module: Service and Repair
Park Assist Module - Removal
REMOVAL
1. lower the headliner to access the module See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Headliner - Removal.
2. Disconnect the two body wire harness connectors (5) from the park assist module connector receptacles.
3. Remove the two fasteners (4) that secure the module to the mounting bracket.
4. Remove the module from behind the headliner.