RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
Seat Fan Switch: Service and Repair
Vented Seat Switch - Removal
FRONT
1. Disconnect and isolate the battery negative cable.
2. Remove the instrument panel center bezel, See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Instrument Panel Bezel - Removal.
3. Disconnect the lower switch pod electrical connector.
4. Remove the lower switch pod fasteners(2) from the center bezel.
5. Remove the switch pod from the center bezel.