RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
an optical horn feature (sometimes referred to as flash-to-pass), which allows the vehicle operator to momentarily flash the headlamp high beams
as an optical signalling device.
-
Turn Signal Control - The multi-function switch control stalk provides both momentary non-detent (lane change) switching or detent switching
with automatic cancellation for both the left and right turn signals.
-
Washer Control - The multi-function switch control knob provides a momentary WASH position for washer system operation.
-
Wiper Control - The multi-function switch control knob provides detent switching for two continuous wipe switch positions, LOW speed or
HIGH speed and an intermittent wipe mode with five DELAY interval positions. The control knob also has a momentary MIST or pulse wipe
feature switch position.
The multi-function switch cannot be adjusted or repaired. If any function of the switch is ineffective, or if the switch is damaged, the entire switch unit
must be replaced. The clockspring with the multi-function switch mounting bracket, Steering Angle Sensor/SAS and the heated steering wheel contact (if
equipped), the multi-function switch (with the internal SCM) and the optional adjustable pedal switch (7) are each available for separate service
replacement.
