RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
Alternator: Service and Repair
Generator Decoupler - Removal
REMOVAL
The generator decoupler is used only with certain engines.
Two different type generator decoupler pulleys are used. One can be identified by the machined splines (3).
The other decoupler is equipped with a hex opening (2) and will not use splines.
Different special tools are required to service each different decoupler. Refer to following procedure.
INA Decoupler
1. Disconnect the negative battery cable.
2. Remove the generator and accessory drive belt See: Generator - Removal.
