RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
Ignition Switch: Service and Repair
Wireless Ignition Node Receiver - Installation
INSTALLATION
1. Connect the WIN electrical connector.
2. If equipped, connect the antenna connector to the WIN.
3. Install the WIN (2) into the to instrument panel.
4. Install the steering column cover opening See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Steering Column Opening Cover - Installation.
5. Connect the negative battery cable.
6. Program the WIN following the Module/Programming Order Replacement Guide and Module Programming procedures See: Powertrain
Management/Computers and Control Systems/Testing and Inspection/Programming and Relearning/Module Programming.