RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
2. Support the rear axle with a suitable holding fixture.
3. Remove the parking brake cable guide bolt (Left side only).
4. Remove the lower control arm bolt (1) and nut at the axle.
5. Remove the lower control arm bolt and nut (2) at the frame.
6. Remove the lower control arm from the vehicle.
Rear Lower Control Arm - Installation
INSTALLATION
NOTE: The small bushing attaches to the frame and the large bushing to the axle.
1. Install the lower control arm to the vehicle.