RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
Suspension Strut / Shock Absorber: Service and Repair
Rear Shock Absorber - Removal
REMOVAL
NOTE: View is typical of a coil spring system. A leaf spring system is similar.
1. Raise and support the vehicle See: Maintenance.
2. Support the rear axle with a suitable holding fixture.
3. Remove the shock upper bolt (1) and nut.
4. Remove the shock lower bolt (3) and nut.
5. Remove the shock absorber (2) from the vehicle.