RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
Rear Door Window Glass Weatherstrip: Service and Repair
Outer Door Belt Molding - Removal
REMOVAL
NOTE: Front door shown, rear door similar
1. Remove the screw from the rear of the outer belt molding (2).
2. Starting from the rear of the door, carefully lift the belt molding upward and disengage the inner portion of the molding from the tabs on the door.
3. Pull the molding rearward to disengage the molding from the outside mirror.
4. Remove the belt molding from the door.