RAM 2500 Truck 2WD V10-8.0L VIN W (2003)
Rear Door Striker: Service and Repair
LATCH STRIKER
REMOVAL
1. Using a grease pencil or equivalent, mark the location of the door latch striker (1) on the C-pillar (2).
2. Remove the two bolts (3) that secure the door latch striker to the C-pillar and remove the striker.
INSTALLATION
1. Position the door latch striker (1) onto the C-pillar (2) and loosely install the two bolts (3).
2. Align the door latch striker to the C-pillar using the reference marks made during the removal procedure and tighten the bolts to 28 N.m (21
ft.lbs.).
3. If necessary, adjust the door latch striker.