RAM 2500 Truck 2WD V10-8.0L VIN W (2003)
Console: Procedures
Floor Console
Floor Console
Removal
1. Remove the 4WD shifter boot.
1 - Instrument Panel
2 - Floor Console
3 - Bolts (3)
4 - Shifter Lever
2. Using a trim stick C-4755 or equivalent, pry up the transmission shifter boot from the console.
3. Remove the transmission shifter extension.
4. Remove the console inserts.
5. Remove and discard the three bolts.
6. Lift up the back and remove the console.
Installation
1. Position the front of the console up under the instrument panel.
2. Lower the back of the console and install three new screws.
3. Install the inserts.