RAM 2500 Truck 2WD V10-8.0L VIN W (2003)
Brake Caliper: Service and Repair
Disc Brake Caliper
Front
REMOVAL - FRONT
CAUTION: Never allow the disc brake caliper to hang from the brake hose. Damage to the brake hose with result. Provide a suitable support to hang
the caliper securely.
1. Install prop rod on the brake pedal to keep pressure on the brake system.
2. Raise and support the vehicle.
3. Remove the tire and wheel assembly.
4. Compress the disc brake caliper.
5. Remove the banjo bolt and discard the copper washer.
6. Remove the caliper slide pin bolts.
7. Remove the disc brake caliper.
INSTALLATION - FRONT