RAM 2500 Truck 2WD V10-8.0L VIN W (2003)
13. Testing for fuel pump check valve, filter/ regulator check valve or fuel tube/line leakage:
Clamp off the rubber hose portion of Adaptor Tool between the vehicle fuel line and test port "T" on Adapter Tool. If pressure now holds at or
above 30 psi, a leak may be found at a fuel tube/line. If no leaks are found at fuel tubes or lines, one of the check valves in either the electric fuel
pump or filter/ regulator may be leaking.
NOTE: A quick loss of pressure usually indicates a defective check valve in the filter/regulator. A slow loss of pressure usually indicates a
defective check valve in the electric fuel pump.
The electric fuel pump is not serviced separately. Replace the fuel pump module assembly The filter/regulator may be replaced separately on
certain applications. Refer to Fuel Filter/Fuel Pressure Regulator Removal/Installation for additional information.