RAM 2500 Truck 2WD V10-8.0L VIN W (2003)
Center Mounted Brake Lamp: Service and Repair
Center High Mounted Stop Lamp Unit (CHMSL) Replacement
REMOVAL
1. Disconnect and isolate the battery negative cable.
Fig.4 Center High Mount Stop Lamp - Typical
2. Remove screws holding CHMSL to roof panel.
3. Separate CHMSL from roof.
4. Disengage wire connector from body wire harness.
5. Separate CHMSL from vehicle.
INSTALLATION
1. Position lamp at cab roof and connect wire connector.
2. Install screws holding CHMSL to roof panel. Tighten securely.
3. Connect the battery negative cable.