RAM 2500 Truck 2WD V10-8.0L VIN W (2003)
Intake Air Temperature Sensor: Service and Repair
REMOVAL
Fig.30 Air Temperature Sensor - 8.0L V-10
The intake manifold air temperature sensor is located in the side of the intake manifold near the front of throttle body.
1. Disconnect electrical connector at sensor.
2. Remove sensor from intake manifold.
INSTALLATION
The intake manifold air temperature sensor is located in the side of the intake manifold near the front of throttle body.
1. Install sensor to intake manifold. Tighten to 12 - 15 Nm (110 - 130 in lbs) torque.
2. Install electrical connector.
