RAM 2500 Truck 2WD V10-8.0L VIN W (2003)
Camshaft Position Sensor: Description and Operation
CAMSHAFT POSITION SENSOR
The Camshaft Position Sensor (CMP) on this engine is located on the timing chain / case cover on the left/front side of engine.
The CMP sensor is used in conjunction with the crankshaft position sensor to differentiate between fuel injection and spark events. It is also used to
synchronize the fuel injectors with their respective cylinders. The sensor generates electrical pulses. These pulses (signals) are sent to the Powertrain
Control Module (PCM). The PCM will then determine crankshaft position from both the camshaft position sensor and crankshaft position sensor.
Fig.11 CMP Sensor Operation - 8.0L V-10 Engine
A low and high area are machined into the camshaft drive gear. The sensor is positioned in the timing gear cover so that a small air gap exists between
the face of sensor and the high machined area of cam gear.
