RAM 2500 Truck 2WD V10-8.0L VIN W (2003)
2. Tighten bolts to 7 Nm (60 in. lbs.) torque.
3. Manually operate the throttle control lever by hand to check for any binding of the TPS.
4. Connect TPS electrical connector to TPS.
5. Install air plenum.
2. Tighten bolts to 7 Nm (60 in. lbs.) torque.
3. Manually operate the throttle control lever by hand to check for any binding of the TPS.
4. Connect TPS electrical connector to TPS.
5. Install air plenum.