RAM 2500 Truck 2WD V10-8.0L VIN W (2003)
3. Install the TRS (Fig. 248) into the mounting bracket with the wiring connector facing the front of the transmission.
4. Install the two screws to hold the TRS to the mounting bracket. Tighten the screws to 3.4 Nm (30 inch lbs.).
5. Verify proper sensor operation (Fig. 249).
6. Move the transmission manual shaft lever to the PARK position.
7. Connect TRS wiring connector to the TRS and lower vehicle.
8. Refill the transmission fluid to the correct level.
