RAM 2500 Truck 2WD V10-8.0L VIN W MDC (1999)
Front Bumper Cover / Fascia: Technical Service Bulletins
Front Bumper - Adjustable Front Fascia
NO: 13-02-98
GROUP: Body
DATE: Nov. 13, 1998
SUBJECT:
Adjustable Front Fascia
MODELS:
1999 (BR/BE) Ram Truck
DISCUSSION:
Some 1999 Ram Trucks are now equipped with an adjustable front fascia. This adjustable front fascia was implemented to make adjustments easier at
the front bumper-to-fender/grille gap. By September 7, 1998 (MDH 0907XX), all assembly plants were building Ram Trucks with the adjustable front
fascia. In addition, service parts for the upper front fascia p/n 55076610AB and the lower front fascia p/n 55076614AB (Non-Sport Package) are
designed to be adjustable. The following information provides proper adjustment procedures for front fascias.
FRONT FASCIA ADJUSTMENT PROCEDURE
1.
Remove the plastic rivet that secures the front upper fascia to the front lower fascia (Figure 1).