RAM 2500 Truck 2WD V10-8.0L VIN W MDC (1999)
Oil Pan Bolt Location
6. Install the oil pan bolts. Tighten the 1/4 inch bolts to 11 Nm (96 inch lbs.) torque. Tighten the stud bolts to 16 Nm (144 inch lbs.) torque. Tighten
the 5/16 inch bolts to 16 Nm (144 inch lbs.) torque.
7. Remove the dowels. Install the remaining 5/113 inch oil pan bolts. Tighten these bolts to 16 Nm (144 inch lbs.) torque.
8. Install the drain plug. Tighten drain plug to 34 Nm (25 ft. lbs.) torque.
9. Install the engine to transmission strut.
10. Lower vehicle.
11. Connect the negative cable to the battery.
12. Fill crankcase with oil to proper level.
