RAM 2500 Truck 2WD V10-8.0L VIN W MDC (1999)
Timing Chain Cover And Oil Seal
5. Place a suitable tool behind the lips of the oil seal to pry the oil seal outward. Be careful not to damage the crankshaft seal surface of the cover.
INSTALLATION
Timing Chain Cover And Oil Seal
1. Position the crankshaft front oil seal onto seal installer special tool 6806 and C-3688. Install seal.
2. Install crankshaft pulley/damper using tool C-3688.
3. Install serpentine belt (Refer to Drive Belts, Mounts, Brackets and Accessories).
4. Install cooling fan and shroud.
5. Connect negative cable to the battery.
TIMING CHAIN COVER OIL SEAL (COVER REMOVED)
REMOVAL
1. With timing cover removed from engine place a suitable tool behind the lips of the oil seal to pry the oil seal outward. Be careful not to damage
the crankshaft seal surface of the cover.
INSTALLATION
1. Position the crankshaft front oil seal onto seal installer special tool 6806.
Oil Seal,Tools-6806 And 6761