RAM 2500 Truck 2WD V10-8.0L VIN W MDC (1999)
Defroster And Demister Duct Adapter Remove/Install
2. Using a trim stick or another suitable wide flat-bladed tool, gently pry at the perimeter edges of the defroster and demister duct adapter to release
the snap features from the top of the heater-A/C housing.
3. Remove the defroster and demister duct adapter from the top of the heater-A/C housing.
4. Reverse the removal procedures to install.
Heater-A/C Housing Inlet Baffle
1. Remove the heater-A/C housing from the vehicle. Refer to: Heating and Air Conditioning, Housing Assembly HVAC, Service and Repair,
See: Housing Assembly HVAC/Service and Repair
Heater A/C Housing Inlet Baffle Remove/Install
2. Slide the heater-A/C housing inlet baffle all the way to one side of the cowl plenum opening.
3. Pull downwards sharply and firmly on the opposite side of the heater-A/C housing inlet baffle to disengage the snap features from the cowl plenum
opening.
4. Remove the heater-A/C housing inlet baffle from the cowl plenum panel.
5. When reinstalling the heater-A/C housing inlet baffle to the cowl plenum panel opening, be certain that the snap features on each side of the
adapter are fully engaged with the sides of the plenum panel opening. This must be a water tight connection to prevent leaks.
6. Reverse the remaining removal procedures to complete the installation.