RAM 2500 Truck 2WD V10-8.0L VIN W MDC (1999)
Rear Band Adjustment Screw Location
4. Tighten adjusting screw to 8 Nm (72 inch lbs.) torque.
46RE Transmission
-
Back off adjusting screw 2 turns.
-
Hold adjusting screw in place and tighten locknut to 34 Nm (25 ft. lbs.) torque.
47RE Transmission
-
Back off adjusting screw 3 turns.
-
Hold adjusting screw in place and tighten locknut to 34 Nm (25 ft. lbs.) torque.
5. Position new gasket on oil pan and install pan on transmission. Tighten pan bolts to 17 Nm (13 ft. lbs.) torque.
6. Lower vehicle and refill transmission with MOPAR ATF+4, Type 9602 fluid.
