RAM 2500 Truck 2WD V8-5.2L VIN Y (2000)
CAUTION: Do not open any doors, or turn on any electrical accessories with the lowest milliampere scale selected, or the multi-meter may be
damaged.
6. Observe the multi-meter reading. The low-amperage IOD should not exceed 25 milliamperes (0.025 ampere). If the current draw exceeds 25
milliamperes, isolate each circuit using the fuse and circuit breaker remove-and-replace process in Step 5. The multi-meter reading will drop to
within the acceptable limit when the source of the excessive current draw is disconnected. Repair this circuit as required; whether a wiring short,
incorrect switch adjustment, or a component failure is at fault.