RAM 2500 Truck 2WD V8-5.2L VIN Y (2000)
5. Test the power lock switch continuity. See the Power Lock Switch Continuity charts to determine if the continuity is correct in the Neutral, Lock
and Unlock switch positions. If OK, repair the door lock switch output (lock and/or unlock) circuit(s) from the body half of the power window and
lock switch and bezel unit wire harness connector to the power lock motors or the high-line or premium versions of the Central Timer Module
(CTM) as required. If not OK, replace the faulty switch.
For addtional testing please refer to Powertrain Management/Computers and Controls/Body Control Module/Testing and Inspection/ See: Body and
Frame/Body Control Systems/Central Timer Module/Testing and Inspection