RAM 2500 Truck 2WD V8-5.7L (2008)
Amplifier: Service and Repair
Installation
INSTALLATION
INSTRUMENT PANEL MOUNTED
1. Connect electrical harness connector (4) and install amplifier (2).
2. Install and tighten mounting bolts (3).
3. Install instrument panel center bezel See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument
Panel Center Bezel - Installation .
4. Install glove box See: Body and Frame/Interior Moulding / Trim/Glove Compartment/Service and Repair/Instrument Panel Glove Box -
Installation .
5. Connect battery negative cable.
CENTER SEAT MOUNTED
1. Connect electrical harness connector and position amplifier.
2. Install and tighten mounting fasteners.
3. Lower center seat.
4. Connect battery negative cable.