RAM 2500 Truck 2WD V8-5.7L (2008)
Radiator Support: Service and Repair
Radiator Upper Crossmember - Installation
INSTALLATION
1. Position and align the upper radiator crossmember (2) to the fender rails.
2. Install the four bolts (1 and 3) that secure the upper radiator crossmember to the fender rails. Tighten the bolts to 28 Nm (21 ft. lbs.).
3. Install the bolts (1 and 2) that secure the A/C condenser and the radiator to the upper radiator crossmember (3). Tighten the bolts to 8 Nm (75 in.
lbs.).
4. Install the hood latch See: Doors, Hood and Trunk/Hood/Hood Latch/Service and Repair/Hood Latch/Installation .
