RAM 2500 Truck 2WD V8-5.7L (2008)
1. Install the hub to the rotor. Tighten the bolts (1) to 128 Nm (95 ft. lbs.).
2. Install the hub and rotor assembly.
3. Install the rear axle shaft to the housing with dual wheels, See: Transmission and Drivetrain/Drive Axles, Bearings and Joints/Axle Shaft
Assembly/Axle Shaft/Service and Repair/Rear Axle - 11 1/2 AA/Installation .
4. Install the caliper adapter bolts 197 Nm (145 ft.lbs) LD.
5. Install the disc brake caliper, See: Brake Caliper/Service and Repair/Removal and Replacement/Disc Brake Caliper - Installation .
6. Install the tire and wheel assembly, See: Maintenance/Wheels and Tires/Service and Repair/Removal and Replacement .
7. Lower the vehicle.
