RAM 2500 Truck 2WD V8-5.7L (2008)
Power Steering Line/Hose: Service and Repair
Power Steering Hoses - Removal
I.F.S. - Return Hose - Gear To Cooler
RETURN HOSE - GEAR TO COOLER
1. Drain and siphon the power steering system.
2. Raise and support the vehicle.
3. Disconnect the return hose at the cooler.
4. Disconnect the return hose (1) at the gear.
5. Remove the return hose from the routing clamp at the fan shroud and then remove from the vehicle.
I.F.S. - Pressure Hose
PRESSURE HOSE
1. Drain and siphon the power steering system.
2. Raise and support the vehicle.
3. Disconnect the pressure hose at the pump.
4. Disconnect the pressure hose (2) at the gear.
5. Remove the pressure hose from the vehicle.
I.F.S. - Return Hose - Reservoir To Cooler
RETURN HOSE - RESERVOIR TO COOLER
1. Drain and siphon the power steering system.
2. Disconnect the return hose at the reservoir.
3. Raise and support the vehicle.
4. Remove the return hose from the routing clamp at the fan shroud.
5. Disconnect the return hose at the cooler.
6. Remove the hose from the vehicle.
Link/Coil - Return Hose - Gear To Cooler
RETURN HOSE - GEAR TO COOLER