RAM 2500 Truck 2WD V8-5.7L (2008)
1. Install the bushing (3) into the control arm (5) using special tool C-4212F (PRESS) (1), 9770-1 (receiver) (2) and 9771-2 (driver) (4).
2. Remove the control arm from the vise.
3. Install the upper control arm See: Service and Repair/Front Upper Control Arm - Installation .
4. Perform a wheel alignment See: Alignment/Service and Repair .
Upper Control Arm Bushings - IFS (HD)
UPPER CONTROL ARM BUSHINGS - IFS (HD)
1. Install the bushing (3) into the control arm (5) using special tool C-4212F (PRESS) (1), 9770-1 (receiver) (2) and 9777-1 (driver) (4).
2. Remove the control arm from the vise.
3. Install the upper control arm See: Service and Repair/Front Upper Control Arm - Installation .
4. Perform a wheel alignment See: Alignment/Service and Repair .
Lower Control Arm Shock Bushing - IFS 4X4
LOWER CONTROL ARM SHOCK BUSHING - IFS 4X4