RAM 2500 Truck 2WD V8-5.7L (2008)
Back Window Regulator: Service and Repair
Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the rear seats See: Body and Frame/Seats/Service and Repair/Seat - Removal .
3. Remove the rear cab back panel See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Rear Cab Back Panel
Trim/Removal .
4. Remove the two mounting bolts (1).
5. Disconnect the electrical connector to the power motor.
6. Separate the cable housings from the glass track (1).
7. Disconnect the cable ends from the vent glass (2).
8. Separate the support clips (5) and remove the regulator assembly (3).