RAM 2500 Truck 2WD V8-5.7L VIN D (2004)
1. Using a small flat-bladed tool, carefully open the two fastener covers (2) located on the grab handle (1).
2. Remove the two bolts (3) that secure the grab handle to the B-pillar and remove the grab handle.
INSTALLATION
1. Install the grab handle (1) onto the B-pillar and install the two bolts (3). Tighten the bolts to 6 N.m (55 in.lbs.).
2. Close the two fastener covers (2) located on the grab handle.
B-Pillar Lower Trim
B-PILLAR LOWER TRIM
REMOVAL
REGULAR CAB
