RAM 2500 Truck 2WD V8-5.7L VIN D (2004)
NOTE: Remove Hub Extension if equipped.
Fig. 1
4. Remove the rotor from the hub/bearing wheel studs.
INSTALLATION - FRONT
1. On models with all-wheel Antilock System (ABS), check condition of tone wheel on hub/bearing. If teeth on wheel are damaged, hub/bearing
assembly will have to be replaced (tone wheel is not serviced separately).
2. Install the rotor onto the hub/bearing wheel studs.
3. Install the caliper adapter assembly and tighten adapter bolts to:
4. Install the wheel and tire assembly and lower the vehicle.
5. Apply the brakes several times to seat brake pads. Be sure to obtain firm pedal before moving vehicle.
