RAM 2500 Truck 2WD V8-5.7L VIN D (2004)
Brake Hose/Line: Service and Repair
Front Brake Hose
REMOVAL - FRONT BRAKE HOSE
1. Install a prop rod on the brake pedal to keep pressure on the brake system.
2. Raise and support vehicle.
3. Remove the tire and wheel assembly.
4. Remove the brake hose from the brake line located at the frame.
5. Remove the brake hose banjo bolt at the caliper.
6. Remove the mounting bolt securing the brake hose to the frame and remove the wheel speed sensor wire from the brake hose.
7. Remove the hose.
INSTALLATION - FRONT BRAKE HOSE
1. Install the hose.
2. Install the mounting bolt for the brake hose at the frame.
3. Install the brake hose banjo bolt at the caliper.
4. Reinstall the wheel speed sensor wire to the brake hose.
5. Remove the support and lower the vehicle.
6. Remove the prop rod from the brake pedal.
7. Bleed the brake system.
