RAM 2500 Truck 2WD V8-5.7L VIN D (2004)
Wheel Speed Sensor: Service and Repair
Front
REMOVAL
1. Remove the front rotor.
2. Remove the wheel speed sensor mounting bolt from the hub.
3. Remove the wheel speed sensor from the hub.
4. Remove the wiring from the clips and disconnect the electrical connector.
INSTALLATION
1. Install the wiring to the clips and Reconnect the electrical connector.
2. Install the wheel speed sensor to the hub.
3. Install the wheel speed sensor mounting bolt to the hub. Tighten the bolt to 21 Nm (190 in. lbs.).
4. Install the front rotor and brake caliper assembly.
